Riedell 110 Yellow Ribbon Figure Skates

Yellow Ribbon
pair side Front Inside Inside
Click On Thumbnails To Enlarge

Skating FUN-damentals . . .Yellow Ribbon 110

The Yellow Ribbon offers the design and quality expected in a Riedell boot. Lined with quilted, soft, man-made lining for additional comfort and maintenance-free performance, the Yellow Ribbon is the perfect choice for the occasional skater requiring quality and value.

Heat Activated Reinforcements:
All Riedell skating boots provide for heat activated individualized fit. Ultra sensitive heat activated reinforcement provides the ultimate in comfort and support. The following procedure should be used for maximum effectiveness of Riedell?s heat activated individualized fit features.

  1. Properly measure for correct skate size.
  2. Preheat warming oven to 200 degrees F.
  3. Place open boots in oven for 8 minutes.
  4. Remove boots from oven and flex back counters open.
  5. Place on skaters foot and tie boots extra snug.
  6. Leave skates on skater for 5 minutes.
  7. Remove skates from skaters feet, allow skater to relax their feet, replace skates on skater using normal lacing pressure, and leave on skater for 2 minutes.
  8. If a specific problem exists, remove skates; heat problem area with heat gun, adjust with boot press as needed.
  9. Re-fit skates using normal lacing pressure.
  10. Enjoy your new skates! Individualized heat activated fit complete

Blade Sharpening

Your skate blades will be professionally sharpened free of charge before they leave here. We use a state-of-the art, fully automatic CagOne profiler system to sharpen blades, so you are guaranteed a perfect edge every time.
Blades will be ground to 1/2" ROH (radius of hollow) unless you specify otherwise. This is the best setting for novice/recreational skaters offering excellent side to side grab whilst still running freely on the glide. If you would prefer a different ROH, please let us know when you order and we will sharpen them to your requirements.